CINELUX
NEXA-MAG for RED DSMC 1 & 2
NEXA-MAG for RED DSMC 1 & 2
Couldn't load pickup availability
SSD Media for DSMC 2®, DSMC 1®
The NEXA-MAG is a high-performance media solution built for RED DSMC1 and DSMC2 cameras. Designed as a direct replacement for RED Mini-Mags, it offers very fast speeds, CNC-machined durability, and rock-solid reliability at a more accessible price point. Compatible with RED media modules, it’s trusted by professionals worldwide. Built to last. Backed by a 2-year warranty. Available in 480GB and 960GB..
Included
Included
1x NEXA-MAG (Choose capacity: 480GB or 960GB)
1x Quick Start Information Sheet
Compatibility
Compatibility
NEXA-MAG is fully compatible with RED cameras that use RED Mini-Mags, including:
RED DSMC2 Series
DRAGON-X 6K S35
DRAGON-X 5K S35
DRAGON-VV 8K VV
MONSTRO 8K VV
WEAPON 6K S35
WEAPON 8K S35
HELIUM 8K S35
EPIC-W S35
GEMINI 5K S35
RED DSMC1 Series
SCARLET MYSTERIUM-X
EPIC MYSTERIUM-X
SCARLET DRAGON
EPIC DRAGON
RED RANGER Series
RANGER GEMINI 5K S35
RANGER HELIUM 8K S35
RANGER MONSTRO 8K VV
⚠️ Note: RED KOMODO, V-RAPTOR, and DSMC3 series cameras are not compatible.
Construction
Material: CNC-machined anodised aluminum
Dimensions: Matches RED Mini-Mag form factor
Weight: Similar to original RED Mini-Mag (~90g est.)
Specification
Specification
Share








SHOOT READY.
NEXA-MAG is engineered for RED® DSMC1 (with mini-mag module) and DSMC2 and it’s proven in the field. From commercial shoots to demanding outdoor productions, it’s been tested in real-world conditions by working filmmakers who rely on stable, high-speed media every day.

FEATURE
FULL POWER.
Older 960GB mini-mags used double the Toshiba components but only accessed half a channel of bandwidth. With NEXA-MAG, we’ve upgraded to a newer generation of Toshiba chips, cutting component count in half while unlocking the full bandwidth channel. The result is 25% faster read speeds, increased reliability with fewer connections, and a lifespan of up to 3000 Terabytes Written (TBW).

FEATURE
MORE LIFE.
Built around ultra-cool running Toshiba components, NEXA-MAG utilises the latest compatible generation of SSD technology. Our drives are rated up to 3000 Terabytes Written (TBW)—over four times the lifespan of a standard Samsung 1TB SSD (720 TBW).

FEATURE
OFFLOAD FAST.
NEXA-MAG achieves offload speeds of up to 570MB/s, a 25% increase over original Mini-Mags. While constrained by SATA III limitations, this is the maximum performance possible for this format - reducing transfer times and maximising shooting efficiency.
Take a Closer Look
FAQs
Do NEXA-MAGs work in a standard RED Mini-Mag reader?
Yes, they are fully compatible with standard RED Mini-Mag readers.
Are there any firmware updates required to use NEXA-MAG?
Yes, for DSMC1®️ and DSMC2®️, you must be running firmware version 6.3.75 or later. For RED ONE®️, you must have the latest firmware installed, version 32.0.3.
Can NEXA-MAG be used interchangeably with RED MINI-MAGs on the same project?
Yes, they act and handle exactly like the original media.
How does KipperTie use a consumer-grade M.2 Samsung drive?
KipperTie uses a SATA-based M.2 Samsung drive that can communicate using technology compatible with RED cameras. While these drives are cost-effective to purchase, getting them to work reliably with RED systems is extremely challenging without direct cooperation from Samsung, as there are over 15-20 specific parameters that have to be setup correctly
Consumer-grade drives, while cost-effective, are less suitable for a few key reasons:
Heat Generation: These drives produce excessive heat, risking thermal throttling, camera cooling strain, and potential long-term damage to sensitive components during extended recording sessions.
NAND Quality: Consumer drives typically use TLC NAND, designed for casual use, lacking the endurance needed for continuous RAW data recording and frequent read/write cycles.
Lifespan: For example, KipperTie's Samsung-based 2TB MINI-MAG® uses TLC NAND rated for 1,200 TBW (600 full drive cycles), while our 960GB SSD with Toshiba MLC NAND is rated for 3,000 TBW (3,000 full drive cycles), offering 5 x the reliability and longevity.
Why do you say NEXA-MAG is compatible with DSMC1?
Some DSMC1 cameras have had the mini-mag module upgrade. Our NEXA-MAGs will work in these cameras, not cameras that have the REDMAG module.
used it on the first shoot and it does what it should. i believe offloading is faster than the original red mags
Works perfectly with all of my RED DSMC2 accessories — a match made in heaven with my Gemini, works in both my G-Raid and RED mag readers without a problem, just like it was made by RED. Price-per-gig is really great, and certainly better than just buying used, which is about the only other option these days. Seems like it has faster sustained write speeds for offloading compared to my OEM mags as well, which is much appreciated. I'm very happy that a company like CineLux is still creating new products for all of these older RED cameras. Much appreciated!
Nexa mag fits 100% with my red dragon x and Works perfectly on my computer using DaVinci Resolve. TEST OK. Great product!
Great product! Working perfectly
Love the finish of the mag and offloads faster than my mini mag:)